Rod hanger concrete screw
Internal Thread Size
SIZE
Embedment depth (mm)
DRILL HOLE DIAMETER (mm)
WRENCH SIZE(mm)
M8+M10
7.5X55
40 / 55
6
13
Internal Thread Size
Thread size
DRILL HOLE DIAMETER (mm)
WRENCH SIZE(mm)
- The 6 mm diameter concrete screw with an ETA 14/0374 assessment and ETA 21/0177 the redundant non-structural systems performance category for additional safety standards.
- The design of the concrete screw with hi-low triple thread offers maximum performance when mounting threaded rods or connecting elements and small edge and spacing distance
- The Joker concrete screw 6mm drill diameter offers the possibility for use in prestressed hollow core slabs, it is an ideal for overhead installation, greatly simplifies the work.
- The ETA approval of concrete screw allows adjustment and easy to fully remove
- Different approved embedment depths allow the screws to be used in a wide range of applications, ensuring excellent flexibility.
- Fire resistance class F120
- Seismic C2 and Vds CEA 4001
- Various pipes
- Sprinkler systems
- High-racks
- Railings
- Piping or ventilation duct
- Prestressed concrete hollow core ceilings
Building materials
- Concrete C20/25 to C50/60, cracked and non-cracked
- Prestressed hollow core concrete slabs, strength C30/37
- Stone
- Brick
- Masonry
- Solid
- Drill a hole in the base material, the hole should be drilled deeper than the screw embedment depth according to our ETA installation instruction (pilot hole required)
- Clean out the hole of all debris.
- Insert the pointed end of the concrete screw through the fixture and into the hole in the base material.
- Drive the screw or use powered impact wrench slowly, allowing the threads to tap into the base material.
Video